Habnex antifoam for jacuzzi 0,5 l
Antifoaming liquid for pools
For use in whirlpools, massage pools, effectively reduces foaming caused by cosmetics or other substances.
Application. If the desired effect is not achieved, apply to the remaining foam after a short time. Use only the amount of chemical required, as over-application can cause oil stains to appear on the surfac...
Specificație detaliată
| 51,90 RON (net: 40,87 RON) | |
Livrare
face
Preluare personală:
1-4 nap
info
După plasarea comenzii și primirea produselor în depozitul nostru (% zile%), vom pregăti coletul, apoi vă vom anunța prin SMS sau e-mail că produsele pot fi ridicate (în magazinul nostru Gazdabolt_2, de luni până vineri de la 8:00 la 17:00).
Prin curier:
1-5 nap
info
După efectuarea comenzii, serviciul de curierat va livra coletul în termen de 1-7 zile lucrătoare, despre care vă vom informa prin e-mail.
Antifoaming liquid for pools
For use in whirlpools, massage pools, effectively reduces foaming caused by cosmetics or other substances.
Application. If the desired effect is not achieved, apply to the remaining foam after a short time. Use only the amount of chemical required, as over-application can cause oil stains to appear on the surface of the water. Store in original packaging in a cool, dry place, out of sunlight. The resulting waste water should not be discharged undiluted or directly into groundwater, surface water or sewage systems.
Dosing rate Depending on the foaming, add 10-100 ml of antifoam to 1 m3 of pool water and wait until the product is well mixed. After application, the pool can be used immediately.
The product can also be used in community bathing water, provided that the concentration of none of the parameters in the water exceeds the limits laid down in Decree 37/1996 (X.18.) NM.
Warning. Keep out of the reach of children.
Content: alpha-octadecyl omega-hydroxy polyglycol ether 1,5-1,7%
CAS number: 9005-00-9, EU number: 500-017-8
Benzene C10-13-monoalkyl derivatives distillation residues 3,5-4%
CAS No 84961-70-6, EU No 284-660-7
For use in whirlpools, massage pools, effectively reduces foaming caused by cosmetics or other substances.
Application. If the desired effect is not achieved, apply to the remaining foam after a short time. Use only the amount of chemical required, as over-application can cause oil stains to appear on the surface of the water. Store in original packaging in a cool, dry place, out of sunlight. The resulting waste water should not be discharged undiluted or directly into groundwater, surface water or sewage systems.
Dosing rate Depending on the foaming, add 10-100 ml of antifoam to 1 m3 of pool water and wait until the product is well mixed. After application, the pool can be used immediately.
The product can also be used in community bathing water, provided that the concentration of none of the parameters in the water exceeds the limits laid down in Decree 37/1996 (X.18.) NM.
Warning. Keep out of the reach of children.
Content: alpha-octadecyl omega-hydroxy polyglycol ether 1,5-1,7%
CAS number: 9005-00-9, EU number: 500-017-8
Benzene C10-13-monoalkyl derivatives distillation residues 3,5-4%
CAS No 84961-70-6, EU No 284-660-7
| Greutate: | 0.5 kg |
|---|---|
| Aviability: | 1-4 nap |
| Basic sales unit: | db |
Autentificare
Conectați-vă sau înregistrați-vă cu un cont de comunitate
Autentificare
Conectați-vă sau înregistrați-vă cu un cont de comunitate